(9) Carefully return the dark slide to position in the cut-film holder.
Assure that the black side of the dark slide handle is outward to indicate the
film in the cut-film holder is exposed. Turn the dark slide lock over the end
of the dark slide handle to prevent re-exposure or accidental removal of the
(10) Pull back the focusing frame assembly and remove the cut-film holder
from the camera.
(11) Turn the cut-film holder over and reinsert it in the camera.
(12) Expose the film in the remaining side of
repeating the procedures in (8) through (10) above.
List the steps you must do in order to open the lens, before you can
focus the 4x5-inch view camera.
You have just loosened the front and rear carriage lock knobs. You are
now ready to
You have just set up your camera and mounted it on a tripod, but it is
about 5 to 6 inches too low to be centered on the subject. Which step should
you take to adjust the difference without moving the subject to be copied?
How do you adjust camera tilt?