(4) Center the film horizontally on the pressure pad (12). Now, close the film gate (11).
INSURE THAT THE FILM GATE IS COMPLETELY CLOSED.
(5) Press and release the exposure button (5) for one exposure.
(6) Open the film gate (11) and remove the film.
To insure that the film (4 x 5 sheet) is correctly placed in the sensitometer, it must be placed in
the following manner. (Circle one.)
a. Film notching code opposite the least density of the step wedge.
b. Emulsion side away from the step wedge.
c. Film placed vertically on the pressure guide.
d. Emulsion side facing the step wedge.
AT THIS TIME YOU WOULD NORMALLY PROCESS YOUR SENSISTRIP,
THEN SECURE THE SENSITOMETER; HOWEVER, WE WILL COVER THE
PROCESSING STEPS A LITTLE LATTER -- WE WILL GO THROUGH THE
STEPS NEEDED TO SECURE THE SENSITOMETER FIRST.