LESSON EXERCISE 2 (CONT)
During an organizational quarterly preventive maintenance inspection, four deficiencies
are found. Select the corrective action an organizational repairman would take to correct
each of the deficiencies from the following list of possible corrective actions.
POSSIBLE CORRECTIVE ACTIONS
Remove with sandpaper
Send to higher category maintenance
Clean with trichlorethane
Install indicator lamp
Clean with a brush
Clean with a rasp
_______________ would be used.
The bearings of the centrifugal fan are excessively noisy. Corrective action
_______________ would be taken.
Rust is found on the exterior of the receiver case. The two corrective actions that
should be taken are ________ and ________.
During the operational check, the meter on the front panel of the transmitter fails
to operate at any meter switch position. Corrective action _______________ would be