Figure 1-25. Location of pole steps at pole-mounted
distributing terminals without protector mountings.
(c) Locate a line step and an on-the-quarter step below the diagonal brace on the pole
(d) Locate a line step and an on-the-quarter step above the step placed as indicated in
paragraph (c) above.
(e) Locate the remaining lower steps as shown in Figures 1-16 through 1-19, as
(5) Pole steps at gas pressure testing points. Poles at gas pressure testing points are stepped
according to general rules (Figure 1-22). Additional double steps will be placed as follows:
(a) Locate double pole steps at steps C and D for strand-mounted apparatus only.
(b) Locate double pole steps at steps D and successive lower pole steps until the lowest
double step is below the pole mounted apparatus.