9. INSTALLATION OF THE POWER AMPLIFIER AM-6545 AND THE ANTENNA
COUPLER CU-2064. Now with the amplifier-converter and the receiver-
transmitter properly installed, you are ready to install the power
a. Loosen the wing nut at the right and left side of the mounting
b. Set the antenna coupler on the top left of the mounting tray.
c. Position the fasteners of the mount to hold in and down on the
side tip of the antenna coupler.
d. Tighten the wing nuts firmly.
Position the side fasteners of the mount to hold in and down n the
f. Tighten the wing nuts firmly.
Radio set AN/GRC-193 in wheeled vehicle mount.