12.
You know that the control levers in the cab of the Truck V-18/MTQ
serve many purposes.
To select high, low, or neutral speed ranges,
you use the
a.
front axle control lever.
b.
front winch shifting lever.
c.
transfer case shifting lever.
d.
transmission gearshift lever.
13.
The asterisk in the nomenclature for Truck V-18(*)/MTQ indicates that
the information presented refers to
a.
Truck V-18/MTQ.
b.
Truck V-18A/MTQ.
c.
Truck V-18A/MQT and V-18/MQT.
d.
Truck V-18/MTQ and V-18A/MTQ.
14.
Truck V-18A/MTQ has many control levers located in the cab of the
vehicle. To engage of disengage these levers, the operator refers to
the
a.
label posted on the windshield visor.
b.
diagram posted inside the panel compartment.
c.
instruction plate or label on each control lever.
d.
instruction plate located on the instrument panel.
15.
The transfer case lever in the cab of Truck V-18A/MTA is used to move
the vehicle. When the service equipment on the truck is placed into
operation, this lever, with one exception,
a.
is moved to the up position.
b.
is moved to the down position.
c.
remains in the neutral position.
d.
is placed in the engage position.
17
Previous Page
