(a) Lift the two ground glass
clips 1 , (fig 1-41), up to let free
the two tips on the ground glass
frame.
(b) Lift the ground glass frame
off the camera area frame and rotate
it either right or left.
(c) Place the ground glass frame
back on the rear camera frame,
placing the bottom edge in first,
then lightly push the top edge until
the two ground glass tips snap into
place under the two ground glass
clips 1 .
Figure 1-41.
Ground Glass Clips.
(7) Lens and shutter assembly adjustment.
(a) After completing the
focusing procedures (para a and b),
depress the shutter release lever
1 , (fig 1-42), to close the
shutter.
Figure 1-42.
Shutter Release Lever.
40
Previous Page
