40.
What size are the interlocking masks of the KS-7A?
______, ______, ______, ______, and ______.
41.
When using the 5x7-inch mask, what other masks must you use?
_______________________________________________________________________________.
42.
What are the four main components of the lens assembly?
_______________________________________________________________________________.
43.
What are the seven speed selections available for use on the KS-7A copy
camera?
_______________________________________________________________________________.
44.
What f/stops are available with the 12-inch focal length lens used with
the KS-7A camera?
_______________________________________________________________________________.
1-17. DESCRIPTION OF LIGHTING SYSTEM.
The
lighting
system
consists
of
a
converter and two light assemblies.
a. Converter. The converter is used to manually or automatically operate
the light assemblies. The converter permits control of the light assemblies to
obtain even illumination and balanced color temperature over the entire surface
of the easel. A 20-foot power cord is permanently attached to the converter.
When set up for operation, the converter is secured to the rear of the cabinet
by means of two converter mounting screws.
b. Light assemblies. The two light assemblies use standard incandescent
lamps (four 150-watt incandescent lamps in each assembly).
The light
assemblies are supported by a carriage assembly (two support arms) that is
secured to the front end block.
Each light assembly has its own 15-foot
interconnection cable (light assembly cable).
52
Previous Page
