7.
When taking a meter reading to check your illumination level, how many areas should you
check?
a.
2
b.
3
c.
4
d.
5
8.
You are copying a textured, smooth surface original. How should you place your lights?
a.
More obliquely
b.
Center your lights
c.
Increase the angle
d.
Use more lighting
9.
You have a bellows extension of 20 inches and the focal length is 12 inches. What is your
bellows extension factor?
a.
1.66
b.
2.75
c.
3.00
d.
3.66
10.
You have an image that is 10 inches high on the ground glass and your original is 13 inches, then
your BEF equals what?
a.
2.65
b.
2.95
c.
3.00
d.
3.25
11.
(Refer to the preceding question.) What would be your corrected exposure if your basic exposure
was 9 seconds at f/22?
a.
27 seconds at f/22
b.
21 seconds at f/22
c.
18 seconds at f/16
d.
9 seconds at f/22
12.
You want to increase contrast, and you are using a commercial film. What can you do?
a.
Underdevelop and underexpose
b.
Overexpose 2 stops and overdevelop
c.
Process at higher temperatures and overdevelop
d.
Under expose two stops and overdevelop 50 percent
43
Previous Page
