7.
If your meter is set at 10 volts DC and you read across a 50-volt line, what
happens to the meter?
a.
Coil may burn out
b.
Nothing will happen
c.
Waveform is all right
d.
Syn lock is all right
8.
The maximum frequency the PSM-6 can handle to measure AC voltage is how many
Hz?
a.
400 Hz
b.
800 Hz
c.
1000 Hz
d.
1400 Hz
9.
What should you expect to read on your meter if your leads are as shown in
Figure 1-24?
a.
100 ohms
b.
Nothing
c.
Parallel path
d.
Correct waveform
10. To determine what type of transistor you are checking you do what first?
a.
Check emitter to base
b.
Check collector to base
c.
Check emitter to collector
d.
Remove from the circuit
35
Previous Page
