16.
Whenever a technician prepares to solder wire pairs to terminal blocks
on a distributing frame, he always includes a cloth in the tool list.
The primary purpose of this cloth is to
a.
catch solder drippings.
b.
protect the technician from spattering solder.
c.
periodically lean the tip of the soldering iron.
d.
wipe soldered joints to make sure they are clean and solid.
17.
A wireman must install the jumpers between
terminal
blocks
on
a
distributing frame so that the wire will be
a.
taut and pass through rings.
b.
slack and pass through rings.
c.
taut and will be wired directly, block to block.
d.
slack and will be wired directly, block to block.
CHECK YOUR
ANSWERS
WITH
LESSON
SOLUTION
SHEET
AND
MAKE
NECESSARY
CORRECTIONS.
119
Previous Page
