(2) Allow the calculated amount of time to pass.
(3) Press
the
cable
release
plunger
a
second
time
to
close
the
shutter.
d. Replace the slide in the filmholder with the black (dull) side of
the slide out to indicate the film has been exposed.
e. Set the locking screw on the filmholder to
hold
the
slide
in
position; remove the filmholder from the focusing back.
f. Shut down the camera set (para 3-5).
g. Process the exposed film IAW film manufacturer's instructions.
3-5
Stopping Procedures
If the camera set is to be placed in a standby condition, follow the
procedures in a below. If the camera set is to be shut down overnight or
for an extended period of time, follow the procedures in b below.
a. Standby shutdown.
(1) Set the MANUAL-TIMER switch (figure 7) on the converter to REMOTE
TIMER OPERATION; the light assembly lamps will glow dimly.
(2) Place the lens cap on the lens.
b. Extended shutdown.
(1) Set the MAIN POWER switch (figure 7) on the converter to OFF.
(2) Place the lens cap on the lens.
38
Previous Page
