EXERCISE
32. In order to perform a visual inspection of the bellows correctly, you
must do it the following way: _____________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
(write statement)
4-7
Operator's Troubleshooting Checklist
a. General.
This checklist helps the operator sectionalize and/or
correct certain troubles. The troubles and correction measures listed are
those the operator can accomplish. If the corrective measures suggested do
not restore normal equipment performance, troubleshooting is required by
higher echelon maintenance personnel.
Note on the DA Form 2404 what
corrective measures were taken and how the equipment performed at the time
of failure.
b. Procedure. Generally, the operator can troubleshoot the camera set
by examining the processed negatives for obvious symptoms.
The symptoms
apply to negatives developed for the normal time in standard developing
solutions. Refer to the symptom column to locate the difficulty indicated
on the negative.
54
Previous Page
