SECTION 6
OPERATOR'S PREVENTIVE MAINTENANCE
6-1
Scope of Operator's Preventive Maintenance
a. Operator's maintenance for the camera set consists of the following:
(1) Preventive maintenance.
(2) Visual inspection.
(3) Cleaning.
(4) Troubleshooting.
b. No special tools on test equipments are required for operator's
preventive maintenance.
6-2
Materials Required
The following items are required by the operator to perform preventive
maintenance.
a. Lint-free cloth (QM-27C-11565-36).
b. Lens tissue (FSN 6640-393-2090).
c. Lens cleaner (FSN 6760-408-5175).
d. Camel's hair brush.
e. Hand blower (air syringe).
f. Cleaning compound, legend form (FSN 7930-395-9542).
WARNING:
Prolonged breathing of cleaning compound is dangerous.
Make sure that adequate ventilation is provided. Cleaning
compound is flammable; do not use near an open flame.
6-3
Preventive Maintenance
a. DA Form 2404 (Equipment Inspection and Maintenance Worksheet) is
used for recording equipment faults found during the operator's inspection,
periodic maintenance services, inspection of equipment by maintenance
activities, diagnostic checkouts and spot check inspection of equipment.
95
Previous Page
