Table 7-2.
Troubleshooting (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
(cont)
Step 3.
Check cartridge spool.
If spool does not rotate, obtain
a
new
cartridge and load the camera.
6.
FILM CANNOT BE REWOUND.
Step 1.
Check to see that the film rewind button has been pressed
(figure 1-22).
Press the film rewind button and rewind the
film.
Step 2.
Check to see that the film has not been pulled off the
supply spool.
If the film has been pulled off the supply
spool, take the camera into a darkroom or
changing bag.
Then unload the camera and
rewind the film onto the cartridge by hand.
7.
METER INOPERATIVE.
Check camera battery.
If camera battery condition indication is
low, replace battery (figure 1-22).
8.
SCRATCHES ON NEGATIVE.
Check to see that the camera film path is free of dirt and dust
(figure 1-25).
If dust or dirt is present, clean the
camera with a lint-free cloth or soft
brush.
9.
LIGHT LEAKS ON FILM.
Step 1.
Check to see that the back cover is completely closed
(figure 1-25).
If the cover is not closed, insure that the
cover hook is inserted in its slot in the
camera body and that the cover latches with
an audible click when it is pressed in
place.
115
Previous Page
