60. Which of the following items should be checked because your build-in
light-meter does not give you a light-meter reading?
a.
ASA setting, f/stop.
b.
Battery and meter switch.
c.
Battery.
d.
Lens cap on lens.
_______________
61. When checking the synchronization of the flash unit and the camera,
what is the correct shutter speed setting?
a.
1/250 sec.
c.
1/25 sec.
b.
1/60 sec.
d.
1/125 sec.
8-2
Cleaning
CAUTION:
Do not use cleaning materials other than those authorized.
Cleanliness is essential for proper operation and preservation of
precision photographic equipment.
Dirty or scratched lens surfaces will
seriously affect the quality of the photograph.
a. Camera body.
(1) Exterior.
(a) Metal surfaces and body covering. Remove the lens from the camera.
Brush the camera body with a soft bristle brush and wipe it with a clean,
lint-free cloth.
NOTE:
A small stick with lens tissue or cotton on the end may be used in
areas otherwise inaccessible.
(b) Optical surfaces.
Clean the
illuminating window, viewfinder
screens, viewfinder prism, and eyepiece.
Follow the procedure for cleaning
lens in (2) below.
(2) Interior.
127
Previous Page
