f. Small mixers will be encountered frequently.
Most have a line out or a
high level output, which will be around 0 level.
Both balanced and unbalanced
outputs will be found on different models. These should be connected to the line
in or aux in of the cassette machine.
Not all mixers have a meter or a master
level control, so sometimes the exact level out will be in doubt.
Again, a test
recording is advised in these circumstances (fig 3-16).
Source-monitoring device and VTR-monitoring device
g. The test line should be connected directly to the line in or aux in. In
most cases the impedances and levels will be suitably matched and no difficulties
should be encountered in the connection of the testline.