Dress and secure all cables, using the plastic tie-down
straps supplied in the cable clamp kit.
Verify that all attaching parts and fastening devices are
secure. If not, secure as necessary.
Installing loud speaker.
INSTALLATION AND REINSTALLATION.
The finished installation of the
AN/GRC-213 must appear as in Figure 10, which identifies the three major
components of the AN/GRC-213 radio set.
The RT-1209/URC receiver-exciter and the AM-6874/PRC-104 amplifier-
coupler are major components of the AN/PRC-104(A) and AN/GRC-213