c. Converter Controls, Indicators and Connectors (fig 1-52).
CONTROL, INDICATOR, OR CONNECTOR
FUNCTION
Main power switch....................
ON and OFF switch.
Position
Function
ON......... Applies power to
converter.
OFF........ Disconnects power
from converter.
Pilot light..........................
Neon indicator; lights when
main power switch is set to
on.
Ammeter..............................
0 to 30 ampere range: indicates
amount of current being drawn
by converter.
NOTE. Indication should not
exceed 30 amperes when power
source is low voltage
(105-125V ac), or 15 amperes
when power source is high
voltage (210-230V ac).
Kelvin meter.........................
Dual scale ac voltmeter: indi-
cates converter output voltage
and related color temperature
in degrees Kelvin that light
assemblies produce.
Interval timer
receptacle...........................
Two-prong female receptacle:
permits connection of interval
timer.
Manual-timer switch..................
Operates manual or timer.
Position
Function
Manual
operation
Sets up converter
output to be con-
trolled (ON or OFF)
by main power switch.
60
Previous Page
