LESSON 4
COLOR REVERSAL FILM PROCESSING
113-578-3023
OVERVIEW
LESSON DESCRIPTION:
In this lesson, you will learn to identify the emulsion changes that occur
after exposure and the resulting dye formation during processing. You will
also learn the steps involved in processing E6 compatible films. You will
learn to mix and monitor control of E6 reversal chemistry.
You also will
learn to identify common process faults and their probable causes.
TERMINAL LEARNING OBJECTIVE:
ACTIONS:
a. Identify reversal film characteristics.
b. Identify the steps necessary to process film.
c. Define the steps necessary to process E6 film.
d. Identify process faults.
CONDITION:
You will be given information from STP 11-25S13-SM-TG.
STANDARD:
Color reversal film processing will be in accordance with
STP 11-25S13-SM-TG.
REFERENCES:
The material contained in this lesson was derived from the
following publication: STP 11-25S13-SM-TG.
INTRODUCTION
In this lesson, you will learn about color reversal films (transparencies or
slides).
Topics to be covered include reversal film characteristics and
film processing; its affect on film, as well as the procedure involved.
Also, chemical mixing, certification, and corrective actions for process
faults will be discussed.
4-1
SS0514
Previous Page
