LESSON 5
PRACTICE EXERCISE
The following items will test your grasp of the material covered in this
lesson. There is only one correct answer for each item. When you complete
the exercise, check your answer with the answer key that follows.
If you
answer any item incorrectly, study again that part of the lesson which
contains the portion involved.
Situation: You are assigned to make an 8 x 10 color print from a 35mm
transparency using conventional reversal paper. In this instance, you have
no previous start-up data concerning exposure or filtration.
Use this
information to respond to items 1 through 3.
1.
Which of the following filter packs should you use as a starting
point?
A.
0C, 0M, 0Y
B.
10C, 25M, 0Y
C.
10C, 10M, 10Y
D.
25C, 25M, 25Y
2.
When making a test print on reversal paper from a transparency, how
many seconds should the intervals be for test exposures?
A.
1
B.
2
C.
5
D.
10
3.
If your test print appears too cyan, which of the following actions
should you take?
A.
Subtract yellow and cyan
B.
Add yellow and cyan
C.
Subtract cyan
D.
Add cyan
4.
If you make a color print from a transparency on Cibachrome materials
and it appears too magenta, which of the following actions should be
taken?
A.
Subtract yellow and magenta
B.
Add yellow and magenta
C.
Subtract magenta
D.
Add magenta
5-13
SS0514
Previous Page
