Rotate the revolving back

Rotate the revolving back as follows:

(1) Rotate the back lock crank to the right to release the locking

mechanism.

(2) Grasp the pressure back near the outer edges and rotate the

entire assembly to the desired position.

(3) Rotate the back lock crank to the left to lock the revolving back

securely in position.

EXERCISE

45. You have just fine focused the image on the ground glass, but there is

too much left over space above the image; in order to correct this you must

perform the following steps:

ANS: _____________________________________________________

_____________________________________________________

46. The image is centered and in approximate focus, but there is a lot of

wasted space all around it. How can you correct this without changing the

camera selected focal length and not move the tripod from where it stands?

ANS: _____________________________________________________

_____________________________________________________

47. To place the plane of sharp focus of the lens in the most advantageous

relationship to the subject, what camera movement should you use to correct

for this?

ANS: _____________________________________________________

_____________________________________________________

90