SECTION 7
339 Controls, Adjustments, and Indicators (figure 313)
The controls, adjustments, indicators, and their functions are listed
in the following chart:
Control, adjustment,
or indicator
Function
Protects electrical circuits from overload.
MOTOR switch
Supplies power to the motor.
HEATER switch
Supplies power to the thermostat control and heater
assembly.
Thermostat control
In OFF position, disconnects power from part of the
heater assembly.
In any other position, regulates the temperature of
the drum by controlling power to part of the
heater assembly.
Speed control
Adjusts apron speed.
Glowlamp
Glows to indicate that thermostat is supplying power
to part of the heater assembly.
Squeegee lever
Positions the squeegee roller in relation to the
drum:
In the GLOSSY PRINTS position, the squeegee
roller is held tightly against the drum.
In the MATTE PRINTS position, the squeegee
roller is held so that a small space
exists between it and the drum.
Apron adjustment
Adjusts lateral position of apron.
screw (fig. 315).
aIn the EL5(1), the circuit breaker is marked CIRCUIT BREAKER.
253
Previous Page
