FIGURE 314. Feed table in lockedup position.
d. Place the squeegee lever (figure 313) in the MATTE PRINTS position,
rotate the drum by hand, and carefully dust the surface of the drum with a
clean, lintfree cloth.
e. Check to see if the drier is properly connected.
f. Operate the circuit breaker (figure 313) to the ON position.
g. Operate the MOTOR switch to the ON position.
h. Operate the HEATER switch to the ON position.
CAUTION:
Do not turn the HEATER switch to the ON position unless the
MOTOR switch is in the ON position.
i. Operate the speed control to cause the apron to move slowly.
256
Previous Page
