4.
What is used to hold the telephone wires in place and prevent sag?
a.
Split knob.
b.
S knob.
c.
Drop wire clip.
d.
Drop wire clamp.
5.
The substation protector, Reliable 2000, is designed to protect the telephone from high voltage
and lightning strikes. What can the installer do to provide this protection?
a.
Install it outside.
b.
Install it in a closed area.
c.
Connect it to any water pipe.
d.
Connect it to a cold water pipe.
6.
The drop wire is connected to the substation protector. To which terminals is the drop wire
connected?
a.
The D terminals.
b.
The L terminals.
c.
The G terminals.
d.
The I terminals.
7.
Ground wires are important in telephone installation. When installing ground wires the installer
should observe which rule?
a.
They can be any length, spiraled and attached to any pipe.
b.
They should run directly, unspiraled and attached to any pipe.
c.
They should run directly, unspiraled and attached to cold water pipe.
d.
They should run directly, unspiraled and attached to hot water pipe.
50
Previous Page
