LESSON 1
INSTALL A TACTICAL TELEPHONE
Critical Tasks: 113-600-1003,
113-600-1012, 113-600-1016,
113-600-1017, 113-588-1096
OVERVIEW
LESSON DESCRIPTION:
In this lesson, you will learn how to install tactical telephones. This is a very important part of your job.
The persons who will use these instruments expect them to be in good operating condition and be
connected to the right equipment to provide them the necessary service.
TERMINAL LEARNING OBJECTIVE:
ACTION:
You will learn the procedures to install a tactical telephone.
CONDITION:
If you do not have access to the equipment, you only need this subcourse. If
available, you will need telephone sets TA-312/PT, TA-341( )/TT, TA-838( )/TT,
TA-954/TT; digital nonsecure voice terminal (DNVT) TA-1035/TT; multiplexer TD-
1233/TT, multiplexer-combiner TD-1234/TT, junction box J-1077A/U; telephone
cable WD-1( )/TT; WF-16/U; TL-13A; gloves; rubber mallet; ground rod; ground
strap; power cord; CX-11230( )/G; test set TS-3647/G; and a training area.
STANDARD:
Upon completion of this subcourse, you will know the procedures for installing
telephones and the multiplexer or multiplexer-combiner.
REFERENCES: The material contained in this lesson was derived from TM 11-5805-201-12, TM 11-
5805-384-12, TM 11-5805-650-12, TM 11-5805-735-12, TM 11-6110-201-12P, TM
11-5805-761-12&P, TM 11-5805-703-12, TM 11-5805-706-12, TM 11-5805-707-12,
DA Pam 738-750, and DA Pam 25-30.
1-1
SS0441
Previous Page
