3.
The cable comes in one length that is 250 feet.
It is normally wound
on a metal reel RC-435/U. See Figure 1-1.
Figure 1-1.
26-pair cable CX-4566/G on reel RC-435/U.
4.
The cable weighs 150 pounds per 1000 feet.
Since it is wound in
250-foot lengths, each 250 feet of cable weighs approximately 37 pounds.
However, this does not account for the weight of the RC-435/U.
5.
The CX-4566G can be connected to a distribution box J-1077A/U.
The
J-1077A/U will permit pass-through of the signals or you can connect
telephone cable to the pair terminals and divert a signal to where it is
needed. The J-1077A/U is normally placed in a strategic location where more
than 1, but not more than 25 circuits are to be distributed. See Figure 1-2
on page 1-4.
6.
Another terminating item for the CX-4566/G is a distribution box
J-2317A/U.
This will permit the connection of four different CX-4566/G
cables and permit cross patching of signals. For example, you could bring
the signals in on one CX-4566/G and cross patch them to any one of three
other CX-4566/G cables and distribute the signals to where they are needed.
You can also drop off any circuits that are needed within the vicinity of
the J-2317A/U. See Figure 1-3 on page 1-4.
1-3
SS0444
Previous Page
