SECTION 2
PREVENTIVE MAINTENANCE SERVICES
2-6
Definition of Preventive Maintenance
Preventive maintenance means making systematic checks and adjustments
at regular intervals to keep the equipment operating at top efficiency. It
is not the same as troubleshooting or repair.
The purpose of
troubleshooting and repair is to locate and correct existing defects.
Preventive maintenance is designed to prevent the development of defects.
The importance of preventive maintenance cannot be overemphasized. Failure
or inefficient operation of one piece of equipment may cause the failure of
the entire photographic system.
It is vitally important, therefore, that
operators and repairmen maintain their equipment properly.
2-7
Tools and Materials Used with Equipment
No special tools are necessary for operation of the printer.
For
organizational maintenance, the following common tools and materials are
needed:
Item
Use
Screw driver (1/4" blade)
For slotted screws.
Pliers
For nylon cable grommet and switch retaining
nuts.
Stiff bristle brush
Clean dirt and other debris from equipment.
Camel's hair brush
Brush off dust and lint.
Bleached cheesecloth,
Wash printing and diffusion glass with
36" wide
soap and water.
Lint-free cloth
Clean dust from lamp house and printing and
diffusion glass.
Sandpaper No. 000
Sand rust spots before painting.
Dry cleaning solvent (SD)
Remove dirt and grease from equipment.
Orange stick
Clean dirt from hard-to-reach places.
141
Previous Page
