EXERCISE
5.
What is the purpose of preventive maintenance?
ANS: _____________________________________________________
_____________________________________________________
6.
In order to remove hard to clean fingerprints and smudge marks from
the printing glass, you should _____________________________________________
____________________________________________________________________________
____________________________________________________________________________
(complete statement)
2-10 Troubleshooting at Organizational Maintenance Level
a. General.
Organizational troubleshooting is performed by the
operator or unit repairman. Familiarity with the equipment will help in the
locating of some troubles and in making minor repairs.
Any abnormal
performance must be checked, its cause discovered, and repairs made.
Repairs beyond the ability of the operator or unit repairman must be
referred to higher repair authority.
When troubles occur, refer to the
equipment performance checklist (para 2-13) and to the general procedures as
outlined in paragraph 2-11.
2-11 Visual Inspection (figures 2-1 and 2-2)
Most defects that may occur in the printer may be detected by visual
inspection.
a. Examine the power cable
to
see
that
the
connecting
plug
and
conductors have not been damaged.
b. Connect the equipment to a power source and move the power switch to
the ON position; the ruby safe lamp should light automatically.
c. Light the printing lamps by manually pressing down on the MOMENTARY
switch. If any of the printing lamps fail to light, try a replacement lamp.
d. Examine the masking blades, platen (front
and
rear) and
platen
springs to see that they are not physically damaged.
145
Previous Page
