gear on the base assembly (figure 3-2), and is secured by the gear latch as
shown in figure 3-8.
FIGURE 3-4.
e. Housing assembly.
The plastic housing assembly (figure 3-1) fits
over the print processor, serving as a protective cover for the other
components and provides bottle holes for the activator and stabilizer
bottles.
f. Feed shelf. The feed shelf (figure 3-1) is a flat stainless steel
tray which attaches to the processing rack assembly, and provides a guide
for the exposed stabilization print into the print processor.
g. Valve assemblies.
Two color-coded plastic
spring-loaded valve
assemblies (red for stabilizer and black for activator
(figure 3-5) are used
to maintain the correct level of each solution in the
solution tray (figure
3-3).
Each valve assembly (figure 3-5 is screwed
onto the top of its
corresponding stabilizer and activator chemical supply
bottle (figure 3-11).
187
Previous Page
