d. Set the film-clip rods on the top of the side-panel brackets; space
the rods evenly from the front to the rear of the cabinet. (The L-shaped
ends will keep the rods from rolling.) Be sure that the air from the vents
in the side panel hits the edges of the film and is across, not against, the
face of the film.
e. Attach weights (figure 3-8) to the lower ends of the film strips to
be sure that they hang straight and do not curl up when dried.
f. Close the door carefully, to avoid loosening any dust there might be
on the inside of the drying cabinet.
FIGURE 3-8.
Roll film hanging from film clips.
239
Previous Page
