Lesson 1
Learning Event 2
PRACTICE EXERCISE
1.
The ENG/EFP system can function from what two power sources?
a.
12 volts DC and AC/DC power converter
b.
9 volts DC and AC/DC power supply
c.
AC outlet and DC power supply
d.
9 volts DC and 12 volts AC
2.
What must be done before turning off power to the recorder?
a.
Disconnect all cables
b.
Remove the video cassette
c.
Complete the mission
d.
Disconnect the camera
3.
How do you put a VR into the RECORD mode?
a.
Press
RECORD button
b.
Press
RECORD, then PLAY button
c.
Press
RECORD and PLAY buttons at the same time
d.
Press
PLAY button, then RECORD button
4.
The FAST FORWARD button has two functions.
What are they?
a.
To remove tape from the takeup reel to the supply reel at a
medium rate of speed
b.
Advance tape at a high rate of speed and forward search
c.
Advance the tape at a medium rate of speed
d.
Remove the tape from the right side of the cassette to the left
side at a fast speed
5.
What should the operator do to activate reverse search?
a.
Press
REVERSE and PLAY at the same time
b.
Press
REWIND
c.
Press
REWIND while in the PLAY mode
d.
Press
the REVERSE SEARCH button
6.
If the pause mode is on too long, what problems will it cause?
a.
Tape stretch
b.
Head clog and tape damage
c.
Nothing. VTRs are designed to pause for long periods of time
d.
Print through and video blanking
30
Previous Page
