f. SHIFT key. The SHIFT key allows you to enter text in either lower
case or upper case. This key, when used simultaneously with the CENTER key
or the FONT SELECT key, provides you with an additional function of the
system.
Please refer to the owner's manual for additional information
regarding this subject.
g. END OF MESSAGE. The END OF MESSAGE key is used to indicate the end
of a composed page. In some CGs, this key is used to control whether a roll
or crawl should loop through continuously, or stop at the end of the
sequence.
h. TAB key.
This key will allow you to set columnar tabs on each
composed page. The tabs can be stored with each page and be recalled later.
(1) To set tabs, follow these steps:
(a) Place cursor at desired location.
(b) Depress TAB/SET.
(c) Repeat steps (1) and (2) until satisfied.
(2) To clear the tabs, follow these steps:
(a) Place cursor at desired location.
(b) Depress TAB/CLEAR.
(c) Repeat steps (1) and (2) until satisfied.
i. ABSOLUTE CENTER KEY.
Press the ABSOLUTE CENTER key to center text
on the screen.
(1) To center text row-by-row, follow the steps below:
(a) Place the cursor anywhere on the desired row.
(b) Depress the CENTER key.
Text will be centered automatically.
(c) Repeat steps (1) and (2) until satisfied.
(2) To center text by page:
(a) Place cursor at row 1, column 1.
(b) Depress the PAGE SELECT (PRIOR/NEXT) key.
(c) Depress the CENTER key, then,
(3) To return text to original position:
28
Previous Page
