NOTE: If flash is desired on only one word or part of
a row, depress the FLASH key where it is to start,
then move cursor to where flash should stop and
depress flash again.
3. Some character generators have ALL the character font styles in
permanent memory.
Others have to be loaded from a disk drive or other
storage devices. These character styles can be changed to different sizes
including small, medium, and large.
a. To change the font style:
(1) Select font style from disk drive, if applicable.
(2) Select font style from internal memory, if applicable.
b. To enter information in a CG, follow the steps below:
(1) Conduct a pre-operational check IAW the owner's manual.
(2) Select font style.
(3) Select background and character color, if applicable.
(4) Place cursor at desired starting position.
(5) Type information in accordance with the script.
(6) Store message in storage device, if applicable.
c. To roll text:
(1) Conduct steps 1 through 6 above.
(2) Select page(s) to be rolled.
(3) Depress the ROLL key.
Text should roll from bottom to top.
d. To crawl text:
(1) Conduct steps 1 through 6 above.
(2) Select page(s) to be crawled.
(3) Depress the CRAWL key.
Text should crawl from right to left.
NOTE: To end either the roll or crawl, depress the
STOP key.
31
Previous Page
