What does the READY LIGHT indicate?
You have just turned the ON-OFF switch to ON, but nothing came on. You
check to make sure that the REPRONAR is properly connected to the electrical
outlet. What should you check next?
How much more light does the HIGH position on the HIGH-LOW switch provide
than the LOW position?
You have just removed the camera back. What is the next step you must do
before you can place the film cassette into the camera?
To insure proper film loading, you must make sure that the film
perforations are aligned with the sprockets, and the film tab is properly
seated into the take-up spool. (Circle one.)
What must you do to properly remove exposed (used) film from the camera?
List the steps to properly connect the sync cord.