f. Assembly of stabilizer and activator valve assemblies to chemical
(1) Remove the cap from each of
the onequart chemical supply
(2) Screw a valve assembly onto
each bottle as shown in figure
(3) Tighten each valve assembly
FIGURE 311. Assembly of
stabilizer and activator valve
assemblies to chemical supply
a. Before applying power to the print processor, remove the feed shelf
(figure 31) and remove the housing assembly [para 312d(6)].
b. Check that the gear latch (figure 38) is securely positioned over
the rack drive gear shaft.
c. Rotate the rack gear by hand to ascertain that all other gears and
rollers operate smoothly.