Introduction - SS05260008
Lesson 1. Draw Objects in One-Point Perspective
Figure 1-1. Perspective nomenclature - SS05260010
Learning Event 2: Define One-Point Perspective
Figure 1-3. Use a plan view to construct a one-point perspective drawing - SS05260012
Learning Event 2: Define One-Point Perspective-cont.
Figure 4. One-point perspective drawing obtained from orthographic views
Learning Event 3: Define Picture Plane, Station Point and Vanishing Point - SS05260015
Figure 1-5. Position of the station point at right or left of center in parallel perspective drawings - SS05260016
Practice Exercise - SS05260017
Answers to Practice Exercise - SS05260018
Lesson 2: Draw Objects in Two-Point Perspective
Figure 2-1. Cube construction - SS05260020
Figure 2-2. Two-point or angular perspective - SS05260021
Figure 2-3. Locating vanishing points for two-point perspective drawn from the plan view - SS05260022
Figure 2-4. Two-point perspective drawing made without using an elevation of the object - SS05260023
Learning Event 1: Define Two-Point Perspective-cont.
Learning Event 2: Define Objects at, Above, and Below Eye Level - SS05260025
Figure 2-6. A. Object placed too high above eye level
Figure 2-7. Finding the vanishing points for incline lines - SS05260027
Figure 2-8. Layout for a circle in perspective
Figure 2-9. Drawing the circle in perspective - SS05260029
Figure 2-10. Circular cylinder in perspective - SS05260030
Figure 2-12. The cone in perspective
Learning Event 3: Identify Measurements in Two-Point Perspective - SS05260032
Learning Event 4: Identify the Use of Diagonals - SS05260033
Figure 2-16. Locating the shelves of the bookcase
Practice Exercise - SS05260035
Answers to Practice Exercise - SS05260036
Lesson 3: Draw Objects in Three-Point Perspective
Figure 3-1. Three-point perspective - SS05260038
Figure 3-2. Division - SS05260039
Figure 3-3. Division of a rectangular area - SS05260040
Figure 3-4. Vertical division - SS05260041
Figure 3-5. Mechanical tool and freehand layout methods - SS05260042
When drawing circles in perspective
Learning Event 2: Identify Compound Forms - SS05260044
Figure 3-6. Plan and elevation views - SS05260045
Practice Exercise - SS05260046
Answers to Practice Exercise - SS05260047
Draw Objects in Perspective
Lesson 1. Draw Objects in One-Point Perspective
Figure 1-1. Perspective nomenclature - SS05260010
Learning Event 2: Define One-Point Perspective
Figure 1-3. Use a plan view to construct a one-point perspective drawing - SS05260012
Learning Event 2: Define One-Point Perspective-cont.
Figure 4. One-point perspective drawing obtained from orthographic views
Learning Event 3: Define Picture Plane, Station Point and Vanishing Point - SS05260015
Figure 1-5. Position of the station point at right or left of center in parallel perspective drawings - SS05260016
Practice Exercise - SS05260017
Answers to Practice Exercise - SS05260018
Lesson 2: Draw Objects in Two-Point Perspective
Figure 2-1. Cube construction - SS05260020
Figure 2-2. Two-point or angular perspective - SS05260021
Figure 2-3. Locating vanishing points for two-point perspective drawn from the plan view - SS05260022
Figure 2-4. Two-point perspective drawing made without using an elevation of the object - SS05260023
Learning Event 1: Define Two-Point Perspective-cont.
Learning Event 2: Define Objects at, Above, and Below Eye Level - SS05260025
Figure 2-6. A. Object placed too high above eye level
Figure 2-7. Finding the vanishing points for incline lines - SS05260027
Figure 2-8. Layout for a circle in perspective
Figure 2-9. Drawing the circle in perspective - SS05260029
Figure 2-10. Circular cylinder in perspective - SS05260030
Figure 2-12. The cone in perspective
Learning Event 3: Identify Measurements in Two-Point Perspective - SS05260032
Learning Event 4: Identify the Use of Diagonals - SS05260033
Figure 2-16. Locating the shelves of the bookcase
Practice Exercise - SS05260035
Answers to Practice Exercise - SS05260036
Lesson 3: Draw Objects in Three-Point Perspective
Figure 3-1. Three-point perspective - SS05260038
Figure 3-2. Division - SS05260039
Figure 3-3. Division of a rectangular area - SS05260040
Figure 3-4. Vertical division - SS05260041
Figure 3-5. Mechanical tool and freehand layout methods - SS05260042
When drawing circles in perspective
Learning Event 2: Identify Compound Forms - SS05260044
Figure 3-6. Plan and elevation views - SS05260045
Practice Exercise - SS05260046
Answers to Practice Exercise - SS05260047
Draw Objects in Perspective
