LESSON 1
Figure 115. Housing Assembly
(6) Insert the Feed Shelf through the processor housing (fig 116) by
tilting the front upward and inserting the shelf as far as it will go, then
lower the assembly. This hooks each end of the shelf to the tie rod (fig 1
14).
Figure 116. Feed shelf
(7) Install chemical supply bottles. After removing the caps from
the onequart solution bottles, install a solution level valve to each
bottle as shown in Figure 117. Tighten each valve securely. To prevent
the contamination of the solutions, always use the black solution valve with
the activator and the red valve with the stabilizer.
39
Previous Page
