(1)
Withdraw the dark slide from the cut-film holder.
(2)
Swing
the
bottom
flap
out
to
open
the
bottom
of
the
cut-film
holder.
(3)
Grasp a sheet of cut-film by the edges so that the emulsion (dull)
side is up and the identification notches are in the upper right hand
corner (fig 1-31).
NOTE:
The identification notches may be felt with the right index finger
when the unnotched shorter edge is toward the operator.
Figure 1-31.
Loading Cut Film Holder.
31
Previous Page
