SS0522
EXERCISE SOLUTIONS
LESSON 2
1.
c, (para 21)
2.
permits setting of margins to desired print size (para 21)
3.
c, (para 24)
4.
Raise or lower the diffusion glass as necessary. (para 25)
5.
to prevent the development of defects (para 26)
6.
Remove glass and wash with soapy water. (para 28)
7.
the operator and unit repairman (para 210)
8.
The ruby safe lamp should light automatically. (para 211)
9.
preparatory, start, equipment performance, stop (para 213)
10.
to give maximum brightness of the projected image (para 222)
11.
Raise or lower the carriage assembly and refocus each time. (para
222)
12.
Position the two slots of the horizontal projection attachment under
the heads of the knurled screws. (para 224)
13.
Emulsion side must be up. (para 224)
14.
cleaning compound, lens cleaner, lens tissue, textile cloth (para
227)
15.
TM 38750 (para 228)
16.
physical and operational checks (230)
17.
provide adequate ventilation and not near any open flame (para 232)
216
Previous Page
