18.
Improper combination of variable condenser lens position and
projection lens selection; use proper projection lens with correct
condenser lens position. (para 233).
19.
printer lamp, condenser lens (para 234)
20.
base assembly, housing assembly, feed shelf, valve assemblies, drain
bottles (para 34)
21.
c. 7.5 feet (para 35)
22.
toward the base assembly (para 38)
23.
water in the activator tray (para 38)
24.
approximately 300 8" x 10" prints (para 39)
25.
down (para 312)
26.
c, (para 312d)
27.
5 minutes (para 312e)
28.
plenty of ventilation and not near open flame (para 315)
29.
d, (para 315)
30.
b, (para 316)
217
Previous Page
