d. Set the filmclip rods on the top of the sidepanel brackets; space
the rods evenly from the front to the rear of the cabinet. (The Lshaped
ends will keep the rods from rolling.) Be sure that the air from the vents
in the side panel hits the edges of the film and is across, not against, the
face of the film.
e. Attach weights (figure 38) to the lower ends of the film strips to
be sure that they hang straight and do not curl up when dried.
f. Close the door carefully, to avoid loosening any dust there might be
on the inside of the drying cabinet.
FIGURE 38. Roll film hanging from film clips.
239
Previous Page
