Figure 2-9. Mounting a VGT
b. Fastening Flips. Flips are overlays that are usually hinged at the sides of the base VGT. You
position them so that you can swing them into position for projection.
(1) You fasten each flip with tape or plastic hinges along the side of the frame. If you
present the flips in a specific order, place them over the base foil, in sequence, and attach to one side of
the mount.
(2) If you want more flexibility in the presentation sequence, hinge your flips on both sides,
alternating sides for each flip. If necessary, you also may use the bottom and top edges of the mount to
hinge the flips. Figure 2-10 illustrates hinging of a flip onto a VGT.
2-17
SS0529
Previous Page
