(5) Remove the fuel tank cap and fill the fuel tank with the
proper grade of fuel. Fuel strainer should be removed from fuel tank
filler neck and cleaned thoroughly.
If fuel strainer is damaged in
any way, it should be replaced.
WARNING
WHEN HANDLING GASOLINE, ALWAYS PROVIDE A METAL-
TO-METAL CONTACT BETWEEN THE CONTAINER AND FUEL
TANK. THIS PREVENTS A SPARK FROM BEING GENERATED
AS GASOLINE FLOWS OVER METALLIC SURFACES.
WHEN
THE GASOLINE TANK FILLER NECK IS ON THE SAME
SIDE, OR ADJACENT TO LOAD TERMINALS, NEVER
SERVICE WHEN SET IS OPERATING.
d. Connect the
load
cables
to
the
load
terminals.
(See Figure 7.)
CAUTION
BEFORE CONNECTING LOAD CABLES, POSITION OUTPUT
SELECTOR SWITCH TO THE DESIRED OUTPUT POSITION.
(See Figure 8.)
FIGURE 7.
GENERATOR SET MEP-016A LOAD TERMINALS.
(1) For 120 volts single phase current, move switch knob to 120
V, 1 PH position.
9
Previous Page
