LESSON 2
INSTALL AND OPERATE THE 5- AND 10-KW GAS GENERATOR SETS
TASK
Install and operate the 5- and 10-kw gas generator sets.
CONDITIONS
1. PERFORMANCE.
Given a 5- and 10-kw gas generator sets,
TM 5-6115-275-14 and TM 5-6115-332-14 extracts with all changes, a
predetermined
site,
accessories,
realistic
tactical
scenario
narrations
and
discussions,
and
assistance
from
a
qualified
supervisory OJT monitor.
2. PERFORMANCE-ORIENTED.
Given
this
lesson,
pencil,
paper,
TM
5-6115-275-14
and
TM
5-6115-332-14
extracts,
and
without
supervision.
STANDARDS
1. PERFORMANCE.
Correctly operate the 5- and 10-kw gas generator
sets, without error, in one of two attempts, within 15 minutes, and
under a simulated jungle tactical scenario environment.
2. PERFORMANCE-ORIENTED.
Correctly respond to 70 percent of the
multiple-choice test covering installation and operation of the 5-
and 10-kw gas generator sets.
REFERENCES
TM 5-6115-332-14; TM 5-6115-275-14.
Learning Event:
INSTALL AND OPERATE THE 5- AND 10-KW DIESEL GENERATOR SETS.
1. Scenario. The soldier is in the jungle under heavy fire, and he
has been using power for his equipment from a 60 kw generator. The
60 kw generator was destroyed in a mortar attack, and the soldier
must now use the 5 or 10 kw generator set, that is on his site. It
is very hot and humid and the soldier must properly install and
operate the
5 or 10 kw generator, under these stressful tactical
conditions.
2.
Characteristics of 5-kw Gas Generator.
The 5-kw gas generator comes in two models, the MEP-017A and
MEP-022A. The following characteristics are similar to both models:
rated at 5 kw, 0.8 power factor (pf), generator output can be 120/240
volts, single-phase, 2-wire; 120 volts, three-phase, 3-wire, or
120/208 volts, three-phase, 4-wire.
The difference between the
models is that the MEP-017A has 60 Hz
32
Previous Page
