FIGURE 3-10.
Bracket location for assembly of
housing assembly.
e. Assembly of feed shelf.
(1) Assemble the feed shelf (figure 3-1) to the print processor by
tilting the front upward.
(2) Insert the shelf into the housing assembly as far as it will go,
then lower the front of the shelf until it is securely in place.
(3) This motion hooks the rear of the feed shelf to the tie rod (figure
3-4).
CAUTION:
To avoid any possibility of contaminating solutions, always
use the black valve assembly with the activator and the red
valve assembly with the stabilizer (para 3-12).
196
Previous Page
