d. Replace the housing assembly and feed shelf (para 3-6d and e).
3-8
Initial Adjustment of Equipment
a. 60 Hz drive gear removal for 50 Hz operation. The print processor
is equipped for operation with the 60 Hz drive gear (figure 3-12) when
supplied as part of the ES-82A (TM 11-6780-225-12, Appendix A).
(1) To remove the 60 Hz drive gear, release the gear latch and remove
the processing rack assembly and solution tray.
(2) Pull off the Teflon retaining washer and slide the 60 Hz drive gear
from the drive shaft, being careful to catch the gear drive pin as it falls
from the drive shaft.
FIGURE 3-12.
60 Hz drive gear removal.
198
Previous Page
