SS0522
EXERCISE SOLUTIONS
LESSON 2
1.
c, (para 2-1)
2.
permits setting of margins to desired print size (para 2-1)
3.
c, (para 2-4)
4.
Raise or lower the diffusion glass as necessary.
(para 2-5)
5.
to prevent the development of defects (para 2-6)
6.
Remove glass and wash with soapy water.
(para 2-8)
7.
the operator and unit repairman (para 2-10)
8.
The ruby safe lamp should light automatically.
(para 2-11)
9.
preparatory, start, equipment performance, stop (para 2-13)
10.
to give maximum brightness of the projected image (para 2-22)
11.
Raise or lower the carriage assembly and refocus each time.
(para
2-22)
12.
Position the two slots of the horizontal projection attachment under
the heads of the knurled screws. (para 2-24)
13.
Emulsion side must be up.
(para 2-24)
14.
cleaning compound, lens cleaner, lens tissue, textile cloth (para
2-27)
15.
TM 38-750 (para 2-28)
16.
physical and operational checks (2-30)
17.
provide adequate ventilation and not near any open flame (para 2-32)
216
Previous Page
