18.
Improper combination of variable condenser lens position and
projection lens selection; use proper projection lens with correct
condenser lens position. (para 2-33).
19.
printer lamp, condenser lens (para 2-34)
20.
base assembly, housing assembly, feed shelf, valve assemblies, drain
bottles (para 3-4)
21.
c.
7.5 feet (para 3-5)
22.
toward the base assembly (para 3-8)
23.
water in the activator tray (para 3-8)
24.
approximately 300 8" x 10" prints (para 3-9)
25.
down (para 3-12)
26.
c, (para 3-12d)
27.
5 minutes (para 3-12e)
28.
plenty of ventilation and not near open flame (para 3-15)
29.
d, (para 3-15)
30.
b, (para 3-16)
217
Previous Page
