3-8
Purpose and Use of Equipment Performance Checklist
The equipment performance checklist (para 3-9) is used to determine
whether Washer EK-1 is functioning properly. The checklist gives the item
to be checked, the normal indication of correct operation, and the
corrective measures that the operator can take.
Check items 1 through 6
before starting, items 7 and 8 when starting, and items 9, 10, and 11 when
stopping.
a. Action or condition.
The information given under the Action or
Condition column represents, in the case of some items, the control settings
at which the item is to be checked.
In other items the information
represents the action that must be taken to check the normal indication
given in the column bearing the title Normal Indication.
b. Normal indication.
The normal indications listed include the
visible and audible signs that the operator will perceive when he checks the
items.
If the indications in the equipment operation are not normal, the
operator should apply the recommended corrective measures.
c. Corrective measures. The corrective measures listed are those that
the operator can make without turning the equipment in for repairs. If the
equipment will not operate or if the recommended corrective measures do not
yield the desired results, turn the equipment in for repair by technical
service personnel.
225
Previous Page
